Pressure Washing Cost Calculator
Estimate pressure washing by area, surface and height. Get a realistic planning range in seconds, then get real quotes from vetted local pros.
How much does pressure washing cost? The average pressure washing cost is about $311, with most jobs running $100 to $711, or roughly $0.10 to $0.50 per square foot depending on the surface. By the hour, pros charge around $75 to $80. Pressure washing is priced by the area cleaned and the surface it is, and the right method matters as much as the rate: hard flatwork like concrete can take real pressure, while siding and roofs need a gentle soft wash instead. This calculator gives you an area-based pressure washing estimate for a general exterior clean. For a single surface, use the driveway, house, deck or roof calculators below for a tighter number.
What affects pressure washing cost
The headline size of the job is only part of the story. Two jobs that look identical can be quoted very differently based on access, condition and how much cleanup is involved. Here is what a crew is actually pricing when they quote you.
Area and square footage
Exterior cleaning is priced largely by the square footage of surface, so the size of the job is the base of the quote, usually $0.10 to $0.50 per square foot.
Surface type
Concrete and pavers take real pressure, while siding, wood and roofs need a low-pressure soft wash and cleaning solution instead.
Height and access
Ground-level flatwork is quick. Two-story walls, roofs and hard-to-reach spots need extension gear and more setup and safety time.
Stains and growth
Light dirt rinses off. Oil, rust, mildew and algae need spot treatment and dwell time, which adds passes and cost.
Soft wash vs pressure
Matching the method to the surface protects your home. Soft washing delicate surfaces is more skilled than blasting everything with a pressure washer wand.
How the pros charge
Most pressure washing companies charge per square foot, about $0.10 to $0.50, though some price by the hour at $75 to $80 or bundle a flat rate for a whole house. Bigger jobs usually earn a better per-foot rate.
Local rates and equipment
Local labor rates, travel, and the equipment a job needs all move the price. Professionals with commercial equipment clean faster and safer than a rented consumer pressure washer.
Water access and add-ons
An available water source keeps it quick, while gutters, windows and sealing are extras beyond the main wash.
Pressure washing cost by size
A quick reference for how the planning range shifts with size, at standard conditions and before extras. Use the calculator above to fine-tune it to your job.
| Job size | Typical area | Planning range | What it looks like |
|---|---|---|---|
| Small | ~2 k sqft | $160 – $215 | A driveway or patio, roughly 1,000 to 2,000 sqft of flatwork, light grime. |
| Medium | ~6 k sqft | $295 – $395 | A driveway plus walkways or a single-story house, standard buildup. |
| Large | ~9 k sqft | $390 – $530 | A whole exterior, two-story siding or a roof soft wash, or heavy staining. |
Typical US ranges from public cost data. Real quotes move with region, season and the specifics of your site.
Pressure washing cost by surface
Different surfaces need different methods and price differently. For a tighter number, open the calculator built for your surface.
| Surface | Method | Get a focused estimate |
|---|---|---|
| Driveway & concrete | Pressure wash | Driveway calculator → |
| House siding | Soft wash | House washing calculator → |
| Deck & fence | Gentle low pressure | Deck cleaning calculator → |
| Roof | Soft wash only | Roof soft wash calculator → |
High pressure suits hard flatwork, while siding and roofs need a low-pressure soft wash.
What pressure washing includes, and what costs extra
A low quote and a high quote often differ less on price and more on what is actually in the number. Confirm where these land before you compare.
- Pre-rinse and wash of the surface
- General detergent for everyday grime
- Rinsing the surrounding area
- Basic setup and water hookup
- Gutter cleaning and window washing
- Oil, rust or heavy stain treatment
- Two-story or roof soft washing
- Sealing or surface protectant after the wash
- House Washing Cost Calculator → for soft washing siding and stucco
- Gutter Cleaning Cost Calculator → often bundled with an exterior wash
Power washing vs pressure washing cost
People use power washing and pressure washing to mean almost the same thing, and the cost is nearly identical. The only real difference is heat: a power washer uses heated water, which cuts grease and heavy grime a little faster, while a pressure washer uses cold water at the same pressure. For most home exteriors, driveways and decks, either does the job and the price is the same, about $0.10 to $0.50 per square foot.
Heated power washing is worth paying slightly more for on oily concrete, garage floors or commercial flatwork. For siding, wood and roofs, neither high-pressure method is right, since those surfaces need a low-pressure soft wash. Match the method to the surface and you protect your home while getting it clean.
How to save on pressure washing
- 1Book in the off-season. Crews quote lower when the calendar is slow. If the job is not urgent, waiting for the quiet months is the easiest way to save.
- 2Get three quotes. Pricing for the same job routinely spreads by hundreds of dollars. Three quotes keeps everyone honest.
- 3Bundle nearby work. A crew already set up at your property will price a second job far cheaper than a separate visit.
- 4Be flexible on scheduling. Filling a gap in a crew's week is worth a discount to them, and to you.
Before you hire
Get proof of liability insurance in writing, be wary of anyone demanding a large deposit up front or quoting sight-unseen, and prefer a pro who walks the job and puts the scope in writing. A legitimate contractor will never need the full amount before the work is done.
- Walks the site before pricing it
- Puts the full scope in writing
- Shows current liability insurance
- Charges a reasonable deposit, if any
- Quotes a firm price sight-unseen
- Demands the full amount up front
- Cannot show proof of insurance
- Pressures you to decide today
How this estimate is calculated
This calculator does not phone home or track you. When you press Calculate, the size, difficulty and extras you pick are sent to our server, run through a transparent cost model, and returned as a low-to-high planning range. It is deliberately a range, not a single number, because the same job is priced differently by every crew and every region.
The ranges come from public US cost data and current contractor pricing, cross-checked against real quotes, and the review team re-checks them as prices move. Treat the output as a solid planning range, then get local quotes to pin down the exact number for your job, region and season. Read the full methodology for how we build and check every tool.
Pressure Washing Cost Calculator FAQ
How accurate is this estimate?
It is a planning range, not a quote. It is calculated server-side from the size, difficulty and extras you choose, using a cost model built from public US cost data and real quotes. Always get local quotes before you budget firmly.
Is the calculator free?
Yes, completely free, with no account and no tracking. We make money when you choose to get matched with local pros, which is always optional.
Why do quotes vary so much?
Access, condition, region and season all move the price, sometimes by 30 to 50 percent for the same job. That is why we show a range and recommend three quotes.
How much does pressure washing cost?
The average pressure washing cost is about $311, with most jobs between $100 and $711. Expect roughly $0.10 to $0.50 per square foot, or $75 to $80 per hour. A single driveway runs $100 to $250, a deck $100 to $200, and a full two-story house $250 to $700 depending on size and surface.
How much does it cost to pressure wash a house?
Pressure washing a house averages around $300 and typically runs $250 to $700 depending on size, height and siding type. Two-story homes cost more for the extra reach and setup, and siding should be soft washed at low pressure rather than blasted.
How much does it cost to pressure wash a driveway?
A driveway or concrete flatwork runs $100 to $500, with an average of $100 to $250, or about $0.20 to $0.40 per square foot. Oil and rust stains add spot treatment and cost.
How much does pressure washing cost per square foot?
Most pros charge $0.10 to $0.50 per square foot for pressure washing, with flatwork like driveways at the lower end and detailed or two-story work at the higher end. A roof soft wash runs more, around $0.50 to $1 per square foot.
How much does power washing cost?
Power washing costs about the same as pressure washing, roughly $0.10 to $0.50 per square foot or a $311 average, since the only difference is heated water. Heated power washing is worth a small premium on oily concrete and commercial flatwork.
What is the difference between pressure washing and soft washing?
Pressure washing uses high pressure for hard surfaces like concrete. Soft washing uses low pressure and a cleaning solution for delicate surfaces like siding and roofs, which high pressure can damage. A good professional uses both, matched to the surface.
Can pressure washing damage my home?
Yes, if the wrong method is used. Too much pressure can crack siding, gouge wood or strip roof granules. Hire a professional who soft washes what needs it rather than blasting everything.
How do pressure washing companies charge?
Most charge per square foot, around $0.10 to $0.50, while some price by the hour at $75 to $80 or quote a flat rate for a whole house. Getting two or three local quotes on the same scope is the best way to compare.
How often should I pressure wash?
Most exteriors do well with a yearly clean, though shade, humidity and heavy tree cover can call for more. Regular washing is cheaper than letting grime and algae build up.
What factors affect the cost of a pressure washing project?
The main factors are the total square footage, the surface and how dirty it is, the height, and your local rates. Materials like detergent and any sealer add a little, and hiring a professional service costs more than renting equipment but gets a safer, faster result. For a quick pressure washing estimate use the calculator above, then get local quotes, since most homeowners pay the average cost of around $311.
More calculators
Driveway Pressure Washing Cost Calculator
Estimate driveway pressure washing cost by area, stains and surface.
Open calculator →House Washing Cost Calculator
Estimate house washing cost by home size, siding type and stories.
Open calculator →Deck Pressure Washing Cost Calculator
Estimate deck pressure washing cost by size, material and staining.
Open calculator →Marko Ristic builds Duhari's cost calculators from real quotes and field pricing, then writes the guide that goes with each one. The goal is a number you can plan around before you ever pick up the phone. More about Marko →
Turn this estimate into real quotes
You have the planning range. Now compare it against real prices from vetted local pros, up to three quotes, free and with no obligation.